TOURANTRAFFIC
Cold-solvent road marking paint White/Yellow
Cold-solvent road marking paint White/Yellow 2

Cold-solvent road marking paint White/Yellow

Brief Introduction

Cold-solvent road marking Paint white/yellow is a quick-drying road marking paint based on acrylic resin, it meets the requirement of JT/T280-2004 standard and is approved by Ministry of Communications Traffic Engineering Test Center.

Product Details

Cold Solvent Road Marking Paint White/Yellow

 

Summarization:  

Cold-solvent road marking Paint white/yellow is a quick-drying road marking paint based on acrylic resin, it meets the requirement of JT/T280-2004 standard and is approved by Ministry of Communications Traffic Engineering Test Center(MCTETC). Following main physical characteristics (Table 1) is in accordance with Test Report issued by MCTETC .

 

 

Application:

The cold-sovlent road marking paint white/yellow is supplied ready for use and is suitable for application to bituminous and concrete roads. It can be successfully applied to airless or air auxiliary spraying equipment. The desired line width and flim thickness can be achieved by varying the spraying gun height, nozzle size, pump pressure and driving speed. It can also be successfully applied with a brush or roller for smaller applications.

 

Transportation:

Touran's cold-solvent road marking Paint is classified as 3 class flammable liquid that should be packed inⅡpacking group by the Chinese Testing and Technical center for dangerous goods and packing(DPTC). UN Number:1263.

 

Packing and storage:

25kg steel drum. Store in a dry, ventilated, cool environment, keep away from rain, moisture, heat and open flames.

 

Additional Information:

Please contact with us if you require:

• Pricing and availability

• Or more specific information on this product or other products in the wide range of products manufactured by us.

 

Above statements, technical information and recommendations contained herein is based on our present knowledge. It is intended to furnish general remarks on our products and their application. Therefore, the information should neither be taken literally nor as a guarantee for special characteristics of products or useful fields of application, and it implies no liability or other legal responsibility on our part,. We reserve the right to make any changes according to technological progress. If you have any questions or doubts please don’t hesitate to contact with us.

Swipe to see full table

Physical Characteristics

Standard

Result

State in container:

No agglomeration, crust, easy to stir uniformly

pass

Density (g/cm3): 

1.2 min.

1.42

Viscosity: (daubing 4 cups, s)

100 min.

145

Drying time of no sticking to wheel (minute)

15 max.

10

Covering Power:

White

95 min.

98

Yellow

80 min.

85

Luminance factor:

White

75 min.

81

Yellow

45min.

52

Adhesiveness (By circle method): 

4.0 max.

2

Abrasion Resistance(mg, 200r/1000g reduce weight):

40 max.

23.60

Flexibility (mm):

5.0 max.

1.0

Solids content (%):

60 min.

69.9

Table 1: Typical properties

Share:

Online Inquiry